| Customization: | Available |
|---|---|
| Shaping Mode: | Custom |
| Surface Finish Process: | Polishing |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
UHMW-PE material are made by high pressing.They have two types:the normal and the reinforced.They have many uncomparable comprehensive traits such as resistance to abrasion ,corrosion,impact and low temperature,self-lubrication,water repellent and anti-adhesiveness.
| No | Item | Diameter/Thickness(mm) | Width(mm) | Length(mm) |
| 1 | Rod | 10-200 | / | 1000 |
| 3 | Sheet | 5-20 | ≤2000 | ≤4000 |
| Properties | Test method | Unit | Typical values |
| Density | DIN53479 | g/m² | 0.95 |
| Friction coefficient | - | 0.28 | |
| Light transmittance | % | 80-88 | |
| Bibulous rate | DIN53495 | % | 0.01 |
| Tensile strength at yield | IS0527 | Mpa | 21.9 |
| Elongation at break | IS0527 | Mpa | 30 |
| Tensile rate | IS0527 | % | 840 |
| Tensile modulus | IS0527 | Mpa | 860 |
| Shore hardness | DIN 53505 | 62 | |
| Dielectric constant | DIN53483 | 2.3 |
Features of UHMWPE as Following : Low density and lightweight plastic/High wear resistance, good mechanical capabilities /Self-lubricating properties, small friction coefficient / Chemical stability, resistant to acids, alkalis and organic solvents /Biocompatibility, applicable in medical fields
Industrial Wear-Resistant Components
Conveying Systems: Liner plates, deflectors, chain guides (Replace metals to reduce noise and wear). /Liners for coal bunkers and hoppers (Anti-adhesion and impact-resistant).
Mechanical Components: Gears, bearings, sliding blocks (Self-lubricating, maintenance-free)./Dewatering plates for papermaking machinery (Corrosion-resistant, minimizes fiber adhesion).
Advantages: Service life is 5-10 times longer than nylon, significantly reducing downtime.
Zhenjiang Hansa Sealant Co., Ltd. is a manufacturing facility that specializes in producing various plastic components. The factory equipped with advanced machinery and technology to efficiently produce high-quality plastic parts. In addition to manufacturing plastic parts, we offer additional services such as assembly, finishing, or customization of the parts. This can include adding logos, labels, or any other branding elements requested by the customer.
Q1.What is your terms of packing
Answer: Generally, we use carbon boxes with wooden boxes outside ,to ensure our products has been safely delivered
Q2.What is your term of delivery
Answer: FCQ DDP, if the usually take 7-10 days
If the total weight of the goods is up to ten tons, the required transport time is approximately 7-10 days
Q3:How about customized service
The demand for product customization is Available
Our customized service can provide unique and personalized plastic parts
){kind=link}